Thermochill PA 160.1 with Shroud

• Copper / brass construction with removeable mild steel powder coated shroud.
• Supplied with shroud installed - Simple removal of 2 screws allows shroud to be relocated on EITHER side of the radiator.
• CrossFlow, Single Pass, 14FPI, 1" Thick core
• 3/8" BSPP (G3/8) Threaded Inlet and Outlet points - offers support for all hose sizes.
• Unique fan shroud gives total air seal. No loss-air as with other designs.
• Pre-punched shroud mounting holes for perfect alignment.
• Radiator designed for maximum performance with minimum noise using a single 120mm fan, as spec'd by Cathar of LittleRiver fame...
• Finish: Matt black or UnPainted (to order unpainted radiators, email steve@thermochill.com)
• Recommended fans: PAPST 4412FGL, Nexus 120mm, Noiseblocker 120mm, Tricod 120mm. See below for C/W Ratings.
• 10mm shroud standoff to minimize dead zone. (With shroud fitted results in fan being 50mm from core surface)
• Overall dimensions HxWxD = 214x166x50mm (90mm inc shroud) - See HERE
• Radiator ships with single side fan screws, shroud & neoprene shroud gasket.
• TECHNICAL DATA
• FAQ

Testing Results

With the following fans (voltage set as shown) the PA160 achieves the following approximate C/W ratings

Tricod @ 5.0v => 0.075 c/w (est: 10dBA, 23cfm)*
Tricod @ 12.0v => 0.044 c/w (est: 22dBA, 45cfm)*
Panaflo L1A @ 12.0v => 0.031 c/w (est: 30dBA, 69cfm) *
Panaflo M1A @ 12.0v => 0.026 c/w **
Panaflo H1A @ 12.0v => 0.022 c/w (est: 41dBA, 104cfm)*
Panaflo H1A @ 16.0v => 0.020 c/w (est: 48dBA, 130cfm)*

Papst 4312L @ 12.0v => 0.038 C/W
Papst 4312L @ 7.0v => 0.051 C/W
Papst 4312L @ 5.0v => 0.062 C/W

Noiseblocker XS1 @ 12.0v => 0.050 C/W
Noiseblocker XS1 @ 7.0v => 0.065 C/W
Noiseblocker XS1 @ 5.0v => 0.078 C/W

XinRuiLian RDL1225S @ 12.0v => 0.047 C/W
XinRuiLian RDL1225S @ 7.0v => 0.060 C/W
XinRuiLian RDL1225S @ 5.0v => 0.074 C/W

Testing done by Cathar at 110w Heatsource, with a flowrate => ~6.6lpm - see HERE for original source

Thermochill PA 160.1 with Shroud