Info on MX4 series LCD panals in .pdf format
Internal USB cable... This allows you to connect your MX4xx directly onto your internal motherboard header.
Temperature probes... These connect directly to the MX4xx and will accurately monitor temperatures. Each probe is 36" long so it is plenty long enough for you to put almost anywhere inside your case.
Indicator LED bus (ILB)... This will allow you to further enhance your MX series experience. This accessory will allow you to have visual indications from LCDC based an many events, such as low hard drive space, new e-mail, and so on.
The ILB kit includes; 1x Indicator LED Bus 3x LED mounting hardware 1x Cable 1x Mounting overlay You will require; *A 8mm drill bit *Free spot in your computer *1-20 minutes of time Installation: 1. Find a location to mount the Indicator 2. Place down the overlay 3. Drill out the holes using a 8mm drill bit 4. Insert the LED mounting hardware in and snap the LEDs into place 5. Connection the cable:
Click for more information on configuring the ILB
Matrix Orbital MX424 4 line LCD