Feser X-Changer Triple 120mm Xtreme Performance Radiator
The Feser X-Changer Triple 120mm Xtreme Performance Radiator is finally here
after a very long development time, many patterns productions and dozens of test
runs. Feser has developed a radiator that has no peers!
Feser only uses the best materials for their radiators. The fins and water
channels consist of high-grade copper (e-Cu). The water chambers consist of a
brass alloy. Feser paid very close attention to each detail, like ensuring that
the layer of the black finish remains very thin, thus the heat-air transfer is
optimized to a maximum. The G1/4" thread for the inlet and outlet of the
radiator offers the highest compatibility for a wide variety of fittings. The
radiators can be installed horizontally or vertically. For a vertical mounting
the air can escape entirely from the radiator by using the bleeder screw.
The radiators have a distinctive "TFC - Xchanger" logo and after each
radiator has been checked by the factory for impermeability and function, it it
gets a hologram label with an individual serial number. This way you know that
you have an original Feser Radiator.
- Water Channels and Fins made out of ECu Copper Material
- Brass Water Chambers
- Black Finish (5µm)
- G1/4" Threads
- Mounting Screws for Case (4/8/12)
- Mounting Screws for Fan (4/8/12)
- Silicon Pads (1/2/3)
- Bleed Valve Screw
- Stamped TFC – Xchanger Logo
- ColorBox Packaging
- Warranty Card
- Serial Number with Holographic Sticker
- Sealed in VCI Bag - 5 Years Corrosion Protection
- 3 Years Warranty
- Compatible with all available Waterooling Systems
- 15mm Fan spacing
| Dimensions: |
411 x 123 x 62 mm
(L x W x H) |
| Color: |
Black Finish |
| Fins Material: |
High-Grade Copper (e-Cu) |
| Water Channels Material: |
High-Grade Copper (e-Cu) |
| Water Chambers Material: |
Brass Alloy |
| Thread Type: |
G1/4" |
| Bleed Valve Screw: |
Yes |
| Warranty: |
3 Years |
Feser X-Changer Triple 120mm Xtreme Performance Radiator
Feser X-Changer Triple 120mm Xtreme Performance Radiator
