The Delrin Fillport is perfect for Filling or Draining a system easily. Delrin is very lightweight and chemically non-reactive. The cap is nickel plated brass and a wrench is included.

The Derlin/Acetal Fillport face is a shiny black finish as shown in the picture below.

Installation:

• Cut a 1" (2.54cm) hole in the top or side of the case.
• Slide in the Fillport
• Secure nut on the underside of the Fillport.
• Connect tubing to the Tee or Reservoir
• Hose Clamp, Wire Tie, or secure tubing