The latest invention from Sunbeam Tech is the Cold Cathode fan. This fan has
a cold cathode 'ring' around it. Sunbeam has made it possible to use this fan's
inverter with an 'add-on' cathode (can be selected below).
Features:
Dual inverter for two lamps
High brightness
High reliability
Long lifetime
Low power consumption
Specification:(Round CCFL)
Diameter of Round cold cathode: 8cm
Input voltage: 12V
Output voltage: 620V
Power compsumption: 2.4watts
Current draw: 0.005A
Brightness: 28,000 cd/m2
Specification:(Fan)
Bearing Type: Sleeve
Fan Dimension: 80x80x25mm
Rated Voltage: 10.2 - 13.8VDC
Current Draw: 0.13A
Power consumption: 1.56WATTS
Air Flow: 31.73CFM
Rotation Speed: 2700RPM
Noise Level: 28dB(A)
Installation:
1) First turn off your computer
2) Mount round cold cathode casing on fan with screws
3) Mount fan on your case
4) Plug round cold cathode with inverter
5) Plug wire harness(or sound activated module) into inverter on the other side
6) Plug the 4-pin male Molex connector into power supply
7) Find a desired place and mount inverter with adnesive Velcro tape
8) Back switch on back slot
9) Turn on the computer and enjoy the fantastic light
80mm Red/Green/Blue CCFL fan with dual invertor